Vitaly

Электрический внедорожник BYD Fang Cheng Bao Ti7 официально показали россиянам. Об этом публично отчитался дилерский центр марки в городе Харбин. Он представил внедорожник с возможностью зарядки с 10 до 97% за 9 минут в рамках Российско-китайского ЭКСПО. Начавший активное развитие экспортного направления концерн BYD долгое время обходит вниманием российский рынок, опасаясь вторичных санкций. Впрочем, в мае автомобиль компании официально представили в павильоне города Шэньчжэнь во время проведения десятого Российско-китайского ЭКСПО 2026. Разбираемся, что это значит. Автомобиль BYD на Российско-китайском ЭКСПОО дебюте Fang Cheng Bao Ti7 на выставке рассказал дилер марки в Харбине. Собственно, он и предоставил машину для демонстрации в рамках регионального павильона города Шэньчжэнь. Отметим, что это не было случайной инициативой. В Китае организация подобных павильонов курируется государственными структурами, а участники проходят конкурсный отбор. Внедорожник BYD Fang Cheng Bao Ti7 на Российско-китайском ЭКСПО / фото из соцсети Это означает, что руководство компании BYD не только было проинформировано о проведении выставки, но и самостоятельно приняло решение об участии. Возможно, такими шагами крупнейший производитель автомобилей на новых источниках энергии аккуратно изучил интерес россиян к своей продукции. – На 10-м Российско-китайском ЭКСПО BYD Fang Cheng Bao Ti7 привлёк огромное внимание публики. Внедорожник понравился не только китайцам, но и зарубежным друзьям, – поделился дилер Fang Cheng Bao в социальной сети. Внедорожник BYD Fang Cheng Bao Ti7 на Российско-китайском ЭКСПО / скриншоты с видео дилера Из сообщения дилера Fang Cheng Bao в Харбине следует, что гости ЭКСПО оценили Ti7. Он перетягивал на себя внимание, несмотря на присутствие на стенде разнообразной техники Huawei. Более того, представители BYD сообщили, что заряжали внедорожник Fang Cheng Bao, демонстрируя возможность сверхбыстрого пополнения батареи. Подробнее о BYD Fang Cheng Bao Ti7 EVИзначально BYD Fang Cheng Bao Ti7 вышел на рынок Китая с параллельной гибридной системой. А в мае 2026 года в продажу поступила полностью электрическая модификация. Её стоимость составила 199,8–239,8 тысячи юаней (2,15–2,6 млн рублей). За пределами Китая данная модель позиционируется в качестве модели материнского бренда и носит название BYD Ti7. Электрический кроссовер Fang Cheng Bao Ti7 на Пекинском автосалоне / фото Autohome Экстерьер этой «семёрки» выделяется за счёт угловатого кузова, крупных бамперов, распашной двери багажного отсека и фиксированных порогов. Точные габариты внедорожника составляют 4999 х 1995 х 1865 мм. Колёсная база – 2920 мм. Салон Ti7 для рынка Китая предлагает исключительно 5-местную конфигурацию. Впрочем, версия для внешних рынков предлагает трёхрядную компоновку. Салон внедорожника Fang Cheng Bao Ti7 Начальную версию Ti7 приводит в движение электромотор на задней оси мощностью 408 л.с. Вариант с полным приводом генерирует 700 л.с. и набирает 100 км/ч за 4,5 секунды. Варианта батареи два: ёмкостью 92 и 105,7 кВт·ч. Оба аккумулятора поддерживают зарядку от 10 до 97% примерно за 9 минут. Запас хода по циклу CLTC составляет 675–755 км. Денис БОБЫЛЕВ (YouTube)

High-performance axial flux motor technology developed by Chinese researchers was unveiled on June 5, featuring a new permanent-magnet material designed for electric vehicles, humanoid robots, and low-altitude aircraft, according to CCTV. The project was jointly developed by Pangoo Power and the Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences. The partners introduced a dedicated permanent magnet material designed specifically for axial flux motors, improving magnetic energy product, high-temperature stability, and mechanical strength while maintaining compatibility with mass production. Why axial flux motors are attracting attention Axial flux motors differ from conventional radial-flux motors by directing magnetic flux parallel to the motor shaft rather than outward from the centre. This disc-shaped architecture shortens the motor’s axial length and allows torque generation closer to the outer diameter, increasing torque and power density while reducing weight. The design dates back to the earliest electric motors developed by physicist Michael Faraday in the 19th century. However, limitations in magnetic materials and manufacturing techniques prevented widespread commercialisation. Advances in permanent magnets, power electronics, and precision manufacturing have renewed interest in the technology. Chinese researchers said axial flux motors can reduce weight and axial size by approximately 50% compared with traditional motors delivering similar performance. These characteristics are particularly relevant for EVs, where compact drivetrains can free chassis space and improve packaging efficiency. New magnet material targets industrial bottlenecks The achievement of 25.73 kW/kg and 18,000 rpm addresses one of the longstanding challenges of axial flux motors. Historically, the disc-shaped architecture has been more difficult to stabilise at high rotational speeds because of structural deformation and magnetic-force imbalances. Improvements in magnetic materials and thermal stability help reduce these limitations, enabling operation under sustained high-load conditions required by modern EV drivetrains. The newly developed magnet material addresses several long-standing challenges in the deployment of axial flux motors. Engineers optimised magnetic formulations, refined microstructures, and improved high-temperature resistance to reduce demagnetisation under high-speed and high-load operating conditions. The resulting production-ready motor reportedly achieves an effective power density of 25.73 kW/kg and exceeds 18,000 rpm. Researchers said the combination of high rotational speed and high power density could support demanding EV operating conditions, including sustained highway driving and repeated acceleration events. The performance figures arrive as Chinese automakers continue to push electric-motor technology in different directions. Xiaomi Auto recently announced that the Xiaomi YU7 GT uses the new HyperEngine V8S EVO powertrain, a major upgrade over the V8S unit. The motor reaches a maximum speed of 28,000 rpm and uses a self-developed silicon carbide (SiC) power module that improves output by 5.9%. Xiaomi said the design also adopts 0.15 mm ultra-thin silicon steel laminations and achieves 98.38% efficiency. Chinese automakers have recently introduced higher-output traction motors, including BYD’s 240 kW electric motor, which has expanded into lower-priced EV segments. Dongfeng has meanwhile commercialised a different approach with the eπ 007 Flash Edition, China’s first volume-produced passenger EV equipped with four factory-fitted in-wheel motors and the world’s only mainstream mass-production four-hub-motor passenger sedan. China EV Global Sales by Brands in May. Credit: China EV DataTracker Beyond passenger vehicles The developers also highlighted applications of humanoid robotics. The axial flux motor system achieves a torque density of 293 N·m/kg, which researchers said is 22% higher than comparable benchmark products. Higher torque density allows robot joints to deliver greater force while maintaining compact dimensions and low weight. Low-altitude aircraft represent another target market where every kilogram saved can improve payload capacity and energy efficiency. In May, BYD ranked as the world’s largest EV maker with sales of 330,215 vehicles. Geely Galaxy, Leapmotor, Zeekr, and Xpeng also ranked among the top-selling EV brands globally from China. High-power/high-torque-density axial-flux motors are displayed.

BYD asked net users to choose the name of its upcoming flagship sedan, allegedly called Great Han. The Dynasty Network’s GM Lu Tian posted six name variants for the new model. It will enter the domestic market as a BEV with over 1,000 km of range under CLTC conditions and flash charging capability. BYD has recently kicked off pre-sales of the Great Tang (Datang) full-size SUV with a 1000V high-voltage system and a starting price of 250,000 yuan (36,930 USD). This vehicle appeared as a massive success, gaining 100,000 pre-orders in less than two weeks, forcing BYD to delay the car’s launch to make sure it would meet the demand. Soon, BYD will introduce its flagship sedan to the market. On June 4, BYD Dynasty Network General Manager Lu Tian asked Weibo social media users to choose the name of the brand’s upcoming flagship sedan. He shared that the company came up with six name variants after several rounds of selection. As a result, six names made it to the final round: Great Han (Dahan) Han 9 Han Ultra Han Tianxia (All-Under-Heaven, represents the traditional Chinese vision of the world order) Xiaohan (Heaven Han) Han Chitu (Han Red Rabbit) The latter three name options for the flagship sedan are closely tied to Chinese culture, as BYD positions itself as a global bearer of Chinese culture. However, at press time, the Great Han variant had the most votes (1,727), with the runner-up, Han Tianxia, obtaining just 254 votes. It is safe to say that BYD’s new flagship will most likely be called Great Han (Dahan). More about the BYD Great Han The BYD Great Han was previously spotted in China several times during road tests. It is a large car with a sleek roofline, a slanted bonnet line, chrome-trimmed multi-spoke rims, and a distinguishing front-end design. The car has a single taillight unit and a LiDAR sensor on the roof. The body length of the Great Han is around 5.2 meters. BYD Great Han sedan The interior of the new model has a three-spoke steering wheel with the Han badge in the center. The gear shifter sits on the steering column, leaving more space on the center tunnel for wireless phone chargers and hidden compartments. The new car adopts a standard floating screen, common for BYD-branded models. It was previously revealed that the BYD Great Han EV will be available with an LFP Blade 2.0 battery capable of charging from 10% to 97% in 9 minutes. The RWD variant of this vehicle will be able to run up to 1,008 km on a single charge. The 4WD option will offer 880 km of range. The Great Han is expected to enter the domestic market in Q3 2026. According to China EV DataTracker, BYD delivered 149,606 cars in April 2026 domestically, down 38.5% Year-Over-Year.

The interior of the BYD Dolphin G plug-in hybrid hatchback designed for Europe was exposed in China ahead of launch. It adopts a minimalistic design language with a few physical buttons. The BYD Dolphin G was recently revealed in official images as the first model developed specifically for Europe. It will be among the first cars that will be assembled in Szeged, Hungary. The prices of the Dolphin G will be revealed in June, with deliveries scheduled for the fall of 2026. Interior of the BYD Dolphin G. Credit: Autohome The Chinese media Autohome shared a spy photo of the Dolphin G’s interior. It has a floating touchscreen and an LCD instrument panel on the dashboard. The car also has a distinguishing three-spoke steering wheel with a gear shifter mounted behind it. The center tunnel has a block of small physical buttons, including a driving mode selector and a music volume lever, and a hazard lights button. Other features of the Dolphin G’s interior include a single cup holder, a hidden compartment, and a transformable section right next to the mentioned block of physical buttons. Its air vents align with the BYD Atto 3 crossover. The rest of the cabin is well-hidden under cloth. BYD Dolphin G hatchback. Credit: BYD It was previously revealed that the BYD Dolphin G’s length and width are 4,160 mm and 1,825 mm, respectively. For clarity, it is 130 mm shorter and 55 mm wider than the European variant of the Dolphin BEV. The exterior styling of this urban driver adopts thin headlights, an active air intake, and two airflows in the front bumper. It also has semi-hidden door handles and darkened D-pillars. There is no information about the Dolphin G’s powertrain. It will most likely adopt a 1.5-liter naturally aspirated engine with a peak power output of 72 kW (97 hp) and an electric motor for 145 kW (194 hp). Two battery variants will be available for 7.8 kWh and 18 kWh. The combined peak power output is 156 kW (209 hp). The Dolphin G can potentially become the spearhead of the brand’s development in Europe. According to China EV DataTracker, BYD’s foreign sales reached 135,098 vehicles, up 70.8% Year-Over-Year.

Chinese EV giant BYD has officially confirmed that it is developing humanoid robots, marking the company’s most direct public statement yet on its ambitions beyond automobiles, according to First Financial. BYD Executive Vice President Li Ke said the company is already working on humanoid robots and believes the key competitive factors in the sector will be manufacturing, software, and hardware capabilities. She added that automotive AI and robotics share common technological foundations. If humanoid robots eventually become household products, BYD could distribute them through its existing dealer network. BYD sees overlap between cars and robots Li Ke said the company’s automotive AI expertise can be applied to robotics because both industries rely on perception, decision-making, motion control, software integration, and hardware engineering. Humanoid robots combine many technologies already used in modern intelligent vehicles, including sensors, electric actuators, batteries, computing platforms, and AI models. Vehicle manufacturers also possess large-scale manufacturing experience, supply-chain management capabilities, and expertise in safety-critical systems. These similarities have encouraged several Chinese automakers to explore robotics as a potential extension of their existing technology stacks. Open-platform approach discussed Li Ke said BYD could create an open platform rather than limiting itself to internally developed products. Under that approach, the company could manufacture its own robots while also cooperating with external robotics companies. Such a model would resemble BYD’s broader strategy in the automotive sector, where the company develops core technologies internally while maintaining extensive supplier and partner networks. The executive did not provide a commercialisation timeline, technical specifications, investment figures, or production targets. Chinese automakers accelerate humanoid robot efforts BYD joins a growing list of Chinese automakers entering the humanoid robotics sector. In April, we reported that Chery began online sales of a humanoid robot equipped with a 0.7-kWh battery and priced at 280,000 yuan (41,400 USD). The move made Chery one of the first major Chinese automakers to publicly commercialise a humanoid robot product. Another industry participant is Xpeng, which has increasingly linked its AI development strategy with future robotics applications. The company has positioned artificial intelligence, autonomous driving, and embodied AI as related technology domains. Earlier, Xpeng unveiled navigation-free driving capabilities and L4 robotaxi plans, highlighting the growing convergence between automotive AI and robotics. Sales Context BYD remains China’s largest new-energy vehicle manufacturer by volume. The company sold 321,123 vehicles in April 2026. Its best-selling model that month was the Sealion 06, which recorded 19,649 deliveries, followed by the Yuan UP at 15,658 units and the Dolphin at 14,218 units, according to China EV DataTracker. BYD model sales in China. Credit: China EV DataTracker